Motor Brackets – Almag

Description

Description

L-Shaped Almag Brackets for Bearon Aquatics Oil-Filled Motors.
4x Stronger than PVC Motor Brackets.
FRESH-WATER ONLY | DO NOT USE IN SALT-WATER. | These motor brackets are NOT suitable for all water types.
Purchase the PVC Motor Brackets for Salt-Water and Brackish Water Conditions.

Included

(4) – Almag Motor Brackets (Large Only)

Tools Needed

(1) – 9/32″ Drill Bit and Drill
(2) – 7/16″ or Adjustable Wrench

Hardware Needed

Typically, original hardware can be reused.  However, here is the hardware needed in the event they have been lost or are unusable.
(4) – 1/4 x 20 x 1 1/4″ Stainless Steel Bolts
(4) – 1/4 x 20 Stainless Steel Nuts
(8) – 1/4 x 20 Stainless Steel Flat Washers

Size Guide

LARGE BRACKETS – Part Number 20300
Dimensions: 3 3/4″ Long Leg (to shroud), 2 7/8″ Short Leg (to motor), 1″ Wide, 1/2″ Thick

Fits the Following
Ice Eater: P750 & P1000
Surface Aerator: F750DP & F1000DP
Aerating Fountain: F500F & F1000F
Flo-Gen: FG750 & FG1000

Additional information