3 in 1 aeration system...
Oxygen loss can devastate
your business. Loss of plant and fish life happens
most often at night or in stagnant waters.
With a 1-hp motor, Flo-Ration is
powerful without a lot of energy.
takes water from below the surface, utilizing motorized
propellers that draw the water in an upward direction
through the cylinder, thus creating better water
flow and/or breaking the surface of the water column,
depending on the angle of the cylinder.
Unit is available in
a 1-hp motor, dual propeller running at 8.2 Amps for
a 115 volt or 4.1 Amps for a 230 volt, and
both are capable of running 50/60 cycle.
This unit can be specified for a 1 or 3 phase multi-position
shall consist of motor assembly, heavy-duty PVC shroud
is designed for corrosion-free operation in fresh or
salt water. Motor exceeds NEMA specifications
and is UL and CSA compliant. C.E. Certified.
brackets will attach motor housing to shroud. All stainless
bolts and locking aircraft nuts are to be
is available with 50’, 100’ or 150’
of water resistant power cord for 115V or
50’, 100’, or 150’ or 200’ for
Unit’s steel frame
has been primed and twice powder-coated for extra protection
pontoons are made from HDPA (High Density Polyethylene).
comes with a 2-year warranty.
assembly shall consist of motor housing, bronze end bell,
electronic motor, start/run components, seals and dielectric
lubricating fluid. The motor housing shall be constructed
of 16 gauge #304 stainless steel and the end bell shall
be cast bronze for corrosion-free operation in either
fresh or salt water. The electric motor, with matched
necessary start/ run components shall sit inside the
motor housing, immersed in the dielectric lubricating
fluid, with the shaft extending through the bronze end bell.
The motor shall have stator windings with double impregnation
of baked insulating varnish, and two heavy-duty ball
bearings to provide support for the rotor. The motor
shaft shall be #303/#304 stainless steel (not plated),
with motor shaft flinger to prevent sand and dirt from
accumulating around the end bell. The assembly shall
also contain an internal, heavy-duty, hard-faced mechanical
seal with stainless steel components to keep assembly
watertight, and an additional seal pressed into the
bronze end bell at the shaft opeing to protect against
sand and dirt abrasion.
should not enter water when unit is in operation.
The Power House, Inc is committed to providing the
finest fountains/aerators available in the marketplace.
to clear waters & healthy fish
is used to increase the level of oxygen saturation within
a body of water, addressing the needs of water treatment
and quality by allowing for adjustments. This system
allows the propellers to work while being tilted at
an angle of 45° and 90°relative to the surface
of the water.
115 or 230 volt
SOTR: LB_O2/Hr 2.35
At this angle, the aerator is always
churning up new
water and forcing the freshly oxygenated water out
to other parts of the pond, easily generating enough
oxygen for 1-3 acres of water.
For larger bodies of water, consider placing several
in a row for even better current flow.
at an incredible 1379 gallons
of water per minute!
The main function
of the Flo-Ration in a horizontal position is to create
current within the waters; constant movement for waters
that are often too calm to maintain healthy aquatic
115 or 230 volt
SOTR: LB_O2/Hr 2.35
In the vertical position, this product
can provide pond aeration in up to 1-surface acre
of water. A single unit at this angle is perfect for
one acre of water or less.
is constantly being circulated giving this aerator
the ability to destratify and create high levels
of dissolved oxygen for your pond.